TekNational - Tek-Sil® GP4XH

Tek-Sil® GP4XH

As with the original Tek-Sil® GP material, the high performance "GP4XH" is available with one hardened surface to ease handling of the material. Release liner is supplied on one side.

As with all other Tek-Sil® materials, Teknational will die cut special shapes to customer specifications.

To order sheets of "GP4XH", specify the thickness

(Part number GP4XH-118 for a sheet .118" (3.0mm) thick).

GP4XH Series	Unit	GP4XH-20	GP4XH-40	GP4XH-60	GP4XH-79	GP4XH-98	GP4XH-118	GP4XH-157	GP4XH-197
Thickness	mm	0.5 +/-0.1	1.0 +/-0.2	1.5 +/-0.2	2.0 +/-0.3	2.5 +/-0.3	3.0 +/-0.3	4.0 +/-0.3	5.0 +/-0.3
Width	mm	200	200	200	200	200	200	200	200
Length	mm	300	300	300	300	300	300	300	300
Thermal Resistance	°Cin²/W	0.27	0.45	0.58	0.75	0.84	0.92
Color	visual					Dark Reddish Gray
Thermal Conductivity	watt/m-k					6
Volume Resistivity	Mohm·m					1.0x10⁵
Withstand Voltage	kV/mm·AC					13
Specific Gravity	gr/cm³					3.2
Hardness	Shore OO					52
Elongation	%					80
Compression	Kgf/in²@10%	136	153	143	91	93	81
	50% sustain after 1 min	76.6	74.6	88.8	54.2	50.3	42.5
Continuous Use	°C					-60° to +200°
Flame Retardance	UL 94V					Check individual product specifications

« More High Performance Thermally Conductive Gap Pads
« More Thermal Materials & Die Cutting