TekNational - Tek-Sil® SA Materials

Tek-Sil® SA Materials

Formulated to provide clean release from most surfaces
Material is rigid enough to be easily die cut
Gap filler can be readily repositioned

Tek-Sil® SA is an unsupported, thermally conductive silicone rubber with high dielectric strength to protect against power surges. Tek-Sil® SA conforms better than many thermally conductive materials while protecting assemblies from mechancial shock and absorbing thermal expansion

Tek-Sil® SA Materials
Properties	Unit	SA-25	SA-32	SA-62
Color	visual	Light Blue	Light Blue	Light Blue
Thickness	inches	0.025 +/-0.003	.032 +/-0.005	.062 +/-0.005
Thickness	mm	0.64 +0.80/-0.0	0.82 +/-0.13	1.57 +/-0.13
Material	binder	Silicone	Silicone	Silicone
Material	filler	Alumina	Alumina	Alumina
Material	reinforcement	n/a	n/a	n/a
Thermal Resist.	°Cin²/W	1.25	1.25	1.25
Thermal Resist. w/PSA(1)	°Cin²/W	1.3	1.3	1.3
Specific Gravity	g/cm³	n/a	n/a	n/a
Hardness (ASTM D2240)	Type A	65	65	65
Tensile Strength	kN/m	n/a	n/a	n/a
Elongation	%	200	200	200
Tear Strength	kN/m	n/a	n/a	n/a
Volume Resistivity	Mohm-m	5 x 10¹⁵	5 x 10¹⁵	5 x 10¹⁵
Withstand Voltage	kV/minute	11	n/a	n/a
Dielectric Constant	1KHz	4.3	4.6	5.3
Maximum Use Temp.	°C	-80°C to 400°C	-80°C to 400°C	-80°C to 400°C
Adhesive Coating	-	n/a	n/a	n/a

(1) FTM P-3010 (ASTM D5470 Equivalent)

« More Thermal Interface Materials
« More Thermal Materials & Die Cutting