- Products :
- PCB Hardware :
- Spacers & Standoffs :
Permanent Spacers
Permanent Spacers
- Customized lengths up to 1".
- 15 ID/OD combinations available.
- Available for #2, 4, 6 and 8 screws.
- Made from extruded Nylon 6/6.
- Inexpensive even in small quantities.
The 5000 Series tubular spacers inexpensively solves many mounting problems. Designs can now be customized without being limited to the few standard lengths of molded spacers commercially available.
The ID/OD combinations for the series 5000 Series are shown in the table. Each ID/OD has its own letter or style designation. (ID/OD of .028"/.085" is "F") The complete part number is 5+"XXX" for the height+the ID/OD style letter. A spacer .200" long with an ID/OD of .028"/.085" will have a part number of 5200-F. Spacers may be ordered in lengths from .030" up to 1.000" in .010 increments. Tolerances are +/-.005" for lengths up to .500", +/-.008" for lengths .505" to .750" and +/-.015" for lengths .755" to 1.000"
| Style | ID | OD | Screw # | |||||
|---|---|---|---|---|---|---|---|---|
| F | .028(0.71) | .085(2.16) | ||||||
| P | .032(0.81) | .085(2.16) | ||||||
| E | .032(0.81) | .125(3.18) | ||||||
| Q | .047(1.19) | .125(3.18) | ||||||
| G | .047(1.19) | .156(3.96) | ||||||
| T | .063(1.60) | .156(3.96) | ||||||
| H | .063(1.60) | .187(4.75) | ||||||
| A | .085(2.16) | .148(3.76) | ||||||
| M | .091(2.31) | .187(4.75) | 2 | |||||
| J | .091(2.31) | .250(6.35) | 2 | |||||
| B | .105(2.67) | .167(4.24) | ||||||
| K | .115(2.92) | .250(6.35) | 4 | |||||
| S | .135(3.43) | .230(5.84) | ||||||
| C | .120(3.05) | .187(4.75) | 4 | |||||
| D | .147(3.73) | .250(6.35) | 6 | |||||